ACADEMICS
Course Details

ELE205 - Circuit Theory Laboratory

2023-2024 Spring term information
The course is not open this term
ELE205 - Circuit Theory Laboratory
Program Theoretýcal hours Practical hours Local credit ECTS credit
Undergraduate 0 3 1 2
Obligation : Must
Prerequisite courses : -
Concurrent courses : ELE203
Delivery modes : Face-to-Face
Learning and teaching strategies : Question and Answer, Experiment, Other: This course must be taken together with 'ELE203 Circuit Theory I' course.
Course objective : The objectives of the course are to support basic theories that the students gain with ELE 203 Circuit Theory I course by performing experimental studies, teach the major measurement parameters and develop their evaluation skills on experimental results related to important circuit theories.
Learning outcomes : A student who completes the course successfully will Use basic measurement devices, Define circuit variables and perform their measurements, Examine time varying responses through capacitive and inductive circuits, Observe and evaluate the results obtained from both theoretical and experimental studies.
Course content : 1. Measurements of voltage and current in DC circuits, verification of Kirchhoff?s Laws, Norton and Thévenin Theorems, power calculations, 2. Measurements of amplitude, frequency and phase of signals by using the oscilloscope, 3. Analysis of Lissajous patterns, 4. Observation of the responses of first order RL circuits, 5. Observation of the responses of first order RC circuits, 6. Observation of the responses of second order RLC circuits.
References : Experiment Notes. ; Nilsson J.W. ve Riedel S.A., Electric Circuits, 10th Ed., Pearson- Prentice Hall, 2015.; Hayt W.H., Kimmerly J.E., Engineering Circuit Analysis, 8th Ed., Mc.Graw Hill, 2012.
Course Outline Weekly
Weeks Topics
1 Introduction to circuit simulation software
2 Preliminary work (report etc.) for Experiment 1
3 Experiment 1: Measuring voltage and current, Kirchhoff?s Laws, Thévenin and Norton equivalent circuits, power calculations in DC circuits
4 Preliminary work (report etc.) for Experiment 2
5 Experiment 2: Measuring amplitude, frequency and phase of signals
6 Preliminary work (report etc.) for Experiment 3
7 Experiment 3: Analysis of Lissajous patterns
8 Preliminary work (report etc.) for Experiment 4
9 Experiment 4: Response of first order RL circuits
10 Preliminary work (report etc.) for Experiment 5
11 Experiment 5: Response of first order RC circuits
12 Preliminary work (report etc.) for Experiment 6
13 Experiment 6: Response of second order RC circuits
14 Study week
15 Final exam
16 Final exam
Assessment Methods
Course activities Number Percentage
Attendance 0 0
Laboratory 6 48
Application 0 0
Field activities 0 0
Specific practical training 0 0
Assignments 0 0
Presentation 0 0
Project 0 0
Seminar 0 0
Quiz 0 0
Midterms 6 12
Final exam 1 40
Total 100
Percentage of semester activities contributing grade success 60
Percentage of final exam contributing grade success 40
Total 100
Workload and ECTS Calculation
Course activities Number Duration (hours) Total workload
Course Duration 0 0 0
Laboratory 6 3 18
Application 1 1 1
Specific practical training 0 0 0
Field activities 0 0 0
Study Hours Out of Class (Preliminary work, reinforcement, etc.) 6 4 24
Presentation / Seminar Preparation 0 0 0
Project 0 0 0
Homework assignment 0 0 0
Quiz 0 0 0
Midterms (Study Duration) 0 0 0
Final Exam (Study duration) 1 12 12
Total workload 14 20 55
Matrix Of The Course Learning Outcomes Versus Program Outcomes
Key learning outcomes Contribution level
1 2 3 4 5
1. Possesses the theoretical and practical knowledge required in Electrical and Electronics Engineering discipline.
2. Utilizes his/her theoretical and practical knowledge in the fields of mathematics, science and electrical and electronics engineering towards finding engineering solutions.
3. Determines and defines a problem in electrical and electronics engineering, then models and solves it by applying the appropriate analytical or numerical methods.
4. Designs a system under realistic constraints using modern methods and tools.
5. Designs and performs an experiment, analyzes and interprets the results.
6. Possesses the necessary qualifications to carry out interdisciplinary work either individually or as a team member.
7. Accesses information, performs literature search, uses databases and other knowledge sources, follows developments in science and technology.
8. Performs project planning and time management, plans his/her career development.
9. Possesses an advanced level of expertise in computer hardware and software, is proficient in using information and communication technologies.
10. Is competent in oral or written communication; has advanced command of English.
11. Has an awareness of his/her professional, ethical and social responsibilities.
12. Has an awareness of the universal impacts and social consequences of engineering solutions and applications; is well-informed about modern-day problems.
13. Is innovative and inquisitive; has a high level of professional self-esteem.
1: Lowest, 2: Low, 3: Average, 4: High, 5: Highest
General Information | Course & Exam Schedules | Real-time Course & Classroom Status
Undergraduate Curriculum | Minor Program For Non-departmental Students | Open Courses, Sections and Supervisors | Weekly Course Schedule | Examination Schedules | Information for Registration | Prerequisite and Concurrent Courses | Legal Info and Documents for Internship | Academic Advisors for Undergraduate Program | Information for ELE 401-402 Graduation Project | Virtual Exhibitions of Graduation Projects | Erasmus+ Program | Program Educational Objectives & Student Outcomes | ECTS Course Catalog | HU Registrar's Office
Graduate Curriculum | Open Courses and Supervisors | Weekly Course Schedule | Final Examinations Schedule | Schedule of Graduate Thesis Defences and Seminars | Information for Registration | ECTS Course Catalog - Master's Degree | ECTS Course Catalog - PhD Degree | HU Graduate School of Science and Engineering